How To Make A Butterfly Kite

How to Brand a Chinese Kite

Kite flying is one of today's most pop pastimes. All over the world people are taking to the air with this 2000-year-old hobby, the simplest and the most antique flying motorcar invented by human.

Today, China is famous for six kite regions: Beijing, Weifang, Tianjin, Nantong, Jiangnan, and Taiwan. Each region uses a unique kite style, with more than 3 hundred types of kites.

Feng-zheng("air current harp" in standard mandarin dialect) is the generally accepted term for Chinese kites, simply they are as well known past many other names, depending on the region and period. In standard mandarin dialect, a kite tin besides be a zhi-yuan ("newspaper kite"), and in Cantonese dialect, a fun-tsun or a pianzi.

1. Make a Butterfly Kite

The Chinese ofttimes make and fly Butterfly kites because they correspond beauty and a free spirit. In that location is an old saying: Only the greatest artists get to sky to paint butterfly wings.

Butterfly Kite

What Yous Need

1. canvass: one 21" (535 mm)-square piece of medium-weight Silkspan

2. spars:

• 1 11" (355 mm) x ¼" (6mm) 10 1/16" (2mm) piece of basswood, for the spine
• Two 24" (635 mm) x ¼" (6mm) ten 1/xvi"(2mm) piece of basswood, for the top spars
• Two 12" (330 mm) x ¼" (6mm) x ane/16"(2mm) piece of basswood, for the bottom spars

three. bridle: 24" (610 mm) piece of kite line

4. tail: two 48" (1220 mm) ten ½" (40 mm) newspaper streamers

5. pattern material: heavy paper or paper-thin

six. kite line: #20 kite line (available at kite stores)

7. reinforcing line (optional): a piece of kite line

viii. antennae (optional): 2-wire twist ties from trash numberless, or a piping cleaner.

nine. gum and paper patches

How to Brand the Kite Pace by Step

one. After making a design of half of the kite, fold the canvass in half and trace the design onto the sheet, with the kite center forth the fold. Allow a ½" (12 mm) glue flap along the pinnacle edge. Cutting out the canvass and snip at two" (50 mm) intervals along the gluing flap.

2. Glue the spine to the sail. Starting with one top corner, glue the flap over the spar and allow the glue fix for a moment. Bend the spar and, using a newspaper patch, mucilage the other cease to the sail. Finish gluing the other corner of the superlative flap. Repeat the aforementioned steps for the other spar.

iii. Mucilage the bottom spars to the sheet and finish them with newspaper patches. (Optional: Run a reinforcing line between the spars.)

iv. Use a edgeless needle to thread the bridle through the sail at the given bridle points.
Tie the ends of the determent around the spars at the height determent point, and the spine at the bottom bridle point.

five.  Measure and tie the kite line at the tow point. Gum tails to the sheet. (Optional: Tape or gum the antennae to the butterfly's caput.)

2. Make a Lark Kite

In China, birds are a symbol of happiness and kept for their beauty and singing power.

What You Need

1. sail: one xviii" (455 mm) x 24" (610 mm) slice of medium-weight Silkspan

2. spars:

• One xviii" (455 mm) x ¼" (6mm) x 1/xvi" (2mm) piece of basswood, for the spine
• Ii 24" (610 mm) x ¼" (6mm) x 1/16" (2mm) piece of basswood, for the top spar
• Ii 4" (100 mm) x 1/viii" (3mm) 10 1/16" (2mm) piece of basswood, for the tail spreaders

(Notation: cut a length of ¼" (six mm) basswood scrap in one-half with your scissors)

iii. bridle: 36" (915 mm) piece of kite line

four. tail: three 36" (1 meter) 10 one" (25 mm) paper streamers

5. pattern material: heavy paper or cardboard

6. glue and paper patches

7. kite line: #10 crochets thread

How to Brand the Kite Step by Step

ane. Draw a gird of ½" (forty mm) squares on blueprint cloth and draw half of the kite. Cut out the pattern. Fold the tail in half and trace the blueprint onto the canvass with the pattern centered on the fold. Allow a 4" (100 mm) x ½" (12 mm) glue flap at the ends of the acme edges.

ii. Unfold the sheet and glue the spine along the fold. Fold the mucilage flap and mucilage the spar to sail, slightly bowing the spar.

3. Glue the tail spreaders to the canvas and gum the paper patches over the spine and spreader ends.

4. Utilize a blunt needle to thread the bridle through the canvass at the given bridle points.

Tie the ends of the determent effectually the spar at the elevation bridle indicate, and the spine at the bottom bridle point. Measure out and tie the bridle to the kite line at the tow signal. Glue a single tail to the canvass and mucilage the other two tails to the bottom of the first tail.

lark kite

3. Make a Serpent Kite

The serpent is a very spectacular kite, great fun to wing, and withal very piece of cake to make. This kite can too exist made to wait like a ghost with a long whitetail.

What You Need

• Spine, 50 cm long
• 2 spears, 35 cm long
• String, for bridle and line
• Glue
• Wrapping paper
• Crêpe paper
• Paints

How to Brand the Kite Pace past Step

1. Attach one spar to the base of the spine and the other 10 centimeters downward from the elevation of the spine.

2. A canvas of colored wrapping paper is used for the comprehend. Cutting it slightly larger than is required and so fold down around the frame and glue the edges to make them a chip stronger. This is the head of the serpent which, non being very large, does non demand any additional reinforcement or support.

three. Make a tail of one continuous length of crêpe newspaper about eight meters long. Cut the tail so that it is xx centimeters wide at the head cease and narrow it gradually all the way downwards its length until it tapers off to a point at the far end.

four. Attach a two-legged bridle at the points market X.

5. Decorate the caput with the face of a serpent. This tin be ferocious or funny – information technology is up to you.

half-dozen. Decorate the tail with stripes or a zigzag design to requite the whole kite a snake-like appearance.

4. Make a Chinese Hawk Kite

The Chinese hawk performs elegantly but you will demand some exercise to handle information technology well. It flies best in a light cakewalk.

What You Demand

• 1 stick, 120 cm long
• two spines, 60 cm long
• Spar, 33 cm long
• Mucilage
• Cord
• Newspaper or cloth
• 2 paper streamers

How to Make the Kite Stride by Step

i. Form a triangular frame with the two spines and spar as shown. Demark and gum them together.

2. Curve the long stick into a bow and necktie it into this shape with a piece of string.

3. Attach the bow to the triangle equally shown.

iv. If the kite is to be covered in newspaper, cut notches at the bottom stop of the ii spines and a long stick to back up the string. Run the framing string from the wingtips to the end of the tail. Cover with a paper sail in the usual mode. Notwithstanding, if the kite is to exist covered with textile, information technology is possible to do abroad with the framing string and allow the edges of the wings to flap in the breeze in a most realistic manner.

v. Decorate equally shown. The simply tail required for this kite consists of a couple of colored paper streamers attached to the 2 lower corners of the triangle. If you wish you could too fix short streamers to the two bottom corners of the wings.

6. Use a iii-legged bridle attached to the three corners of the triangle. You could also endeavor a five-legged bridle with the ii extra legs being fastened to the wingtips.

5. Make a Rice Kite

This kite is traditionally used past Chinese farmers in a ceremony in which they besprinkle rice over their paddy fields to ensure a good harvest.

What You Need

• 2 sticks, i 1000 long
• ii sticks, 75 cm long
• 2 sticks, fifty cm long
• Spine, 120 cm long
• Glue
• Paper
• String (for determent and lead)

How to Brand the Kite Step by Footstep

1. Starting time make iii oval shapes every bit shown.

2. Demark the largest oval to the spine after making sure that the spine is on the center signal of the oval (if it's not the kite will not be counterbalanced correctly). The top of the oval should be about five cm downwards from the top of the spine.

three. The other two ovals are then attached in a similar manner but the second 1 should overlap the offset by about seven and a half centimeters and the third should overlap the 2d by 5 centimeters. At each stage make sure the kite is well balanced gluing everything into place.

4. Cover with newspaper leaving open the areas where the ovals overlap.

5. Attach a two-legged bridle to the point marked Ten.

six. The kite normally has a paper bow tail to the finish of which is attached to a sheaf of rice. If yous live near a subcontract you could enquire the farmer for a few stalks of wheat. These tin can be tied to the tail and to the tips of the ovals to make your kite await like the Chinese original.

Alternatively, paper streamers can be used to represent the sheaves.

Demand Aid?

Asking a custom itinerary today and get ane footstep closer to your personalized trip

Create Your Trip

Source: https://www.chinatravel.com/culture/how-to-make-a-kite

Posted by: danielswhimmight77.blogspot.com

Share this post